Sequentially numbering multiple copies of single document using a macro

Create a bookmark named “SerialNumber” in the document where you want the Serial Number to appear. It can be in the header or footer if that is where you want the number.

Then create a macro containing the following commands to print the document.

It will ask for the number of copies that you want to make and sequentially number each copy.

The first time this macro runs, the first copy will be numbered 1 and when it finishes running, it will store in aSettings.Txt file the number that is one more that the number on the last copy.

The next time the macro is run, it will start numbering the copies from that number. If when you first start, you want the numbers to start at some number other than 1, run the macro, entering 1 as the number of copies and then open Settings.Txt file and replace the number in the file with the number that you want as the first in the series.

At any time thereafter, if you want the series to start at a particular number, you can open that file and replace the number in it with the number that you want to be the first in the series.

Dim Message As String, Title As String, Default As String, NumCopies As Long
Dim Rng1 As Range

' Set prompt.
Message = "Enter the number of copies that you want to print"
' Set title.
Title = "Print"
' Set default.
Default = "1"

' Display message, title, and default value.
NumCopies = Val(InputBox(Message, Title, Default))
SerialNumber = System.PrivateProfileString("C:\Settings.Txt", _
"MacroSettings", "SerialNumber")

If SerialNumber = "" Then
    SerialNumber = 1
End If

Set Rng1 = ActiveDocument.Bookmarks("SerialNumber").Range
Counter = 0

While Counter < NumCopies
    Rng1.Delete
    Rng1.Text = SerialNumber
    ActiveDocument.PrintOut
    SerialNumber = SerialNumber + 1
    Counter = Counter + 1
Wend

'Save the next number back to the Settings.txt file ready for the next use.
System.PrivateProfileString("C:\Settings.txt", "MacroSettings", _
        "SerialNumber") = SerialNumber

'Recreate the bookmark ready for the next use.
With ActiveDocument.Bookmarks
    .Add Name:="SerialNumber", Range:=Rng1
End With

ActiveDocument.Save

If you want the Serial Number to appear in a particular format, e.g. 001, 002, etc, replace the line

Rng1.Text = SerialNumber

with

Rng1.Text = Format(SerialNumber, "00#")

To run a macro at schedule time

If you want to keep your workbook open and run code at a specified time, later on, then try this..
Insert a new code module to your project -or- use one that you already have in your project.
Create a scheduler subroutine as shown below:

Sub Scheduler()

'-- RUNS SUB(S) (OR FUNCTIONS) AT TIME SCHEDULED.

    Application.OnTime TimeValue("11:46:40"), "TheScheduledSub"

End Sub

Create a subroutine (or function) that you want to run. Here is one for this example:

Sub TheScheduledSub()

    Debug.Print "TheScheduledSub() has run at " & Time

End Sub

Scheduler() will execute TheScheduledSub() at the exact time specified inside Scheduler(), defined by TimeValue. You can read more about TimeValue here.

You could probably pass the time value you want the Scheduler() sub to execute your sub(s) or function(s) in as a parameter in the sub.
You could probably run a sub 5 hours from now, lets say. I.E. Application.OnTime Now + TimeValue("05:00:00"), "TheScheduledSub"

Convert DD/MM/YYYY format to MM/DD/YYYY format and vice versa

Here is the solution to convert any data format to your required format

For Example:

DD/MM/YYYY to MM/DD/YYYY
MM/DD/YYYY to DD/MM/YYYY
also to
YYYY/MM/DD
MM/YYYY/DD
DD/YYYY/MM
YYYY/DD/MMMM

Follow this method to do that:

Select Dates
Data Menu
Text To Column
Delimited - Untick all options (Can also use Fixed Width)
Next
Select Date Option
Finish

Copy all mail contents from Outlook to excel sheets separate by each Column

To copy all the mail contents from outlook to excel in separate column, please do the following:

1. Copy the below code in outlook
2. Crate a file in C folder
3. run the macro from Outlook
4. Results will be in excel

The Macro code is:


Sub CopyToExcel()
Dim xlApp As Object
Dim xlWB As Object
Dim xlSheet As Object
Dim olItem As Outlook.MailItem
Dim vText As Variant
Dim sText As String
Dim vItem As Variant
Dim i As Long
Dim rCount As Long
Dim bXStarted As Boolean
Const strPath As String = "C:\Sample.xlsx" 'the path of the workbook

If Application.ActiveExplorer.Selection.Count = 0 Then
    MsgBox "No Items selected!", vbCritical, "Error"
    Exit Sub
End If
On Error Resume Next
Set xlApp = GetObject(, "Excel.Application")
If Err &lt;&gt; 0 Then
    Application.StatusBar = "Please wait while Excel source is opened ... "
    Set xlApp = CreateObject("Excel.Application")
    bXStarted = True
End If
On Error GoTo 0
'Open the workbook to input the data
Set xlWB = xlApp.Workbooks.Open(strPath)
Set xlSheet = xlWB.Sheets("Sheet1")
 rCount = xlSheet.UsedRange.Rows.Count
'Process each selected record
For Each olItem In Application.ActiveExplorer.Selection
    sText = olItem.Body
    vText = Split(sText, Chr(13))
    'Find the next empty line of the worksheet
 
    rCount = rCount + 1

    'Check each line of text in the message body
    For i = UBound(vText) To 0 Step -1
        If InStr(1, vText(i), "Name:") &gt; 0 Then
            vItem = Split(vText(i), Chr(58))
            xlSheet.Range("A" &amp; rCount) = Trim(vItem(1))
        End If

        If InStr(1, vText(i), "Email:") &gt; 0 Then
            vItem = Split(vText(i), Chr(58))
            xlSheet.Range("B" &amp; rCount) = Trim(vItem(1))
        End If

        If InStr(1, vText(i), "Phone:") &gt; 0 Then
            vItem = Split(vText(i), Chr(58))
            xlSheet.Range("C" &amp; rCount) = Trim(vItem(1))
        End If

        If InStr(1, vText(i), "Address:") &gt; 0 Then
            vItem = Split(vText(i), Chr(58))
            xlSheet.Range("D" &amp; rCount) = Trim(vItem(1))
        End If

        If InStr(1, vText(i), "Event:") &gt; 0 Then
            vItem = Split(vText(i), Chr(58))
            xlSheet.Range("E" &amp; rCount) = Trim(vItem(1))
        End If

        If InStr(1, vText(i), "Location:") &gt; 0 Then
            vItem = Split(vText(i), Chr(58))
            xlSheet.Range("F" &amp; rCount) = Trim(vItem(1))
        End If

       
    Next i

    xlWB.Save
   
Next olItem
xlWB.Close SaveChanges:=True
If bXStarted Then
    xlApp.Quit
End If
Set xlApp = Nothing
Set xlWB = Nothing
Set xlSheet = Nothing
Set olItem = Nothing
End Sub

There are many ways to use Excel formulas to decrease the amount of time you spend in Excel and increase the accuracy of your data and your reports.

Excel Formulas You Should Definitely Know:

1. SUM

Formula: =SUM(5, 5) or =SUM(A1, B1) or =SUM(A1:B5)

The SUM formula does exactly what you would expect. It allows you to add 2 or more numbers together. You can use cell references as well in this formula.

The above shows you different examples. You can have numbers in there separated by commas and it will add them together for you, you can have cell references and as long as there are numbers in those cells it will add them together for you, or you can have a range of cells with a colon in between the 2 cells, and it will add the numbers in all the cells in the range.

2. COUNT

Formula: =COUNT(A1:A10)

The count formula counts the number of cells in a range that have numbers in them.

This formula only works with numbers though:

It only counts the cells where there are numbers.

3. COUNTA

Formula: =COUNTA(A1:A10)

Counts the number of non-empty cells in a range. It will count cells that have numbers and/or any other characters in them.

The COUNTA Formula works with all data types.

It counts the number of non-empty cells no matter the data type.

4. LEN

Formula: =LEN(A1)

The LEN formula counts the number of characters in a cell. Be careful though! This includes spaces.

Notice the difference in the formula results: 10 characters without spaces in between the words, 12 with spaces between the words.

5. TRIM

Formula: =TRIM(A1)

Gets rid of any space in a cell, except for single spaces between words. I’ve found this formula to be extremely useful because I’ve often run into situations where you pull data from a database and for some reason extra spaces are put in behind or in front of legitimate data. This can wreak havoc if you are trying to compare using IF statements or VLOOKUP’s.

I added in an extra space behind “I Love Excel”. The TRIM formula removes that extra space. Check out the character count difference with and without the TRIM formula.

6. RIGHT, LEFT, MID

Formulas: = RIGHT(text, number of characters), =LEFT(text, number of characters), =MID(text, start number, number of characters).

(Note: In all of these formulas, wherever it says “text” you can use a cell reference as well)

These formulas return the specified number of characters from a text string. RIGHT gives you the number of characters from the right of the text string, LEFT gives you the number of characters from the left, and MID gives you the specified number of characters from the middle of the word. You tell the MID formula where to start with the start_number and then it grabs the specified number of characters to the right of the start_number.

I used the LEFT formula to get the first word. I had it look in cell A1 and grab only the 1st character from the left. This gave us the word “I” from “I love Excel”

I used the MID formula to get the middle word. I had it look in cell A1, start at character 3, and grab 5 characters after that. This gives us just the word “love” from “I love Excel”

I used the RIGHT formula to get the last word. I had it look at cell A1 and grab the first 6 characters from the right. This gives us “Excel” from “I love Excel”

7. VLOOKUP

Formula: =VLOOKUP(lookup_value, table_array, col_index_num, range_lookup)

By far my most used formula. The official description of what it does: “Looks for a value in the leftmost column of a table, and then returns a value in the same row from a column you specify…”.  Basically, you define a value (the lookup_value) for the formula to look for. It looks for this value in the leftmost column of a table (the table_array).

Note: If at all possible use a number for the lookup_value. This makes it a lot easier to make sure the data you are getting back is a correct match.

If it finds a match of the “lookup_value” in the left column of the “table_array” it will return the value in the column you specify using the “index_num”. The “index_num” is relative to the left most column. So, if you have the table_index look in column A and you want what is returned to be what’s in column B the “index_num” would be 2 because the leftmost column, column A in this case, is the 1st column in the table array and column B is the 2nd column (hence the 2 for the index number). If you want what is in column C to be returned you’d put 3 for the index_num. The “range_lookup” is a TRUE or FALSE value. If you put TRUE it will give you the closest match. If you put FALSE it will only give you an exact match. I only use FALSE when using the VLOOKUP formula.

Example:

You have 2 lists: 1 with a sales person’s ID and the sales revenue for the quarter. Another with the sales person’s ID and the sales person’s name. You want to match up the sales person’s name to the sales person’s revenue numbers for the quarter. They are all jumbled around so to manually match this, even for a small number of salesmen would leave room for a high margin of error and take a lot of time.

The first list goes from A1 to B13. The 2nd list goes from D1 to E25.

In cell C1 I would put the formula =VLOOKUP(B18, $A$1:$B$13, 2, FALSE)

B18 = the lookup_value (the sales person’s ID. This is a number that appears on both lists.)

$A$1:$B$13 = the “table_array”. This is the area I want the formula to search the leftmost column (column E in this case) for the “lookup_value”. I went to F because if it finds match in column E, I want it to return what’s in column F. (The money signs are there so that the table_array will stay the same no matter where the formula is moved or copied to. This is called an absolute reference.)

2 = the index_num. This tells the formula the number of columns away from the left most column to return in case of match. So, if you find a match between the lookup_value and the leftmost column of the table array, return what’s in the same row in the 2nd column of the table (the 1st column is always the leftmost column. It starts at 1, not 0).

FALSE= tells the formula I want it to only return the value if it’s an exact match.

I would then copy and paste that formula along all the cells in column C next to the first list. This would give me a perfectly aligned list with the sales person’s ID, sales person’s revenue for the quarter, and the sales person’s name.

In order to get a nice neat list of Sales Person ID, Sales Person Name, and Sales Person Revenue all next to each other I used the VLOOKUP formula to compare 1 list to another.

This is a complicated formula, but an extremely useful one. Check out some other examples: 

8. IF Statements

Formula: =IF(logical_statement, return this if logical statement is true, return this if logical statement is false)

When you’re doing an analysis of a lot of data in Excel there are a lot of scenarios you could be trying to discover and the data has to react differently based on a different situation.

Continuing with the sales example: Let’s say a salesperson has a quota to meet. You used VLOOKUP to put the revenue next to the name. Now you can use an IF statement that says: “IF the salesperson met their quota, say “Met quota”, if not say “Did not meet quota” (Tip: saying it in a statement like this can make it a lot easier to create the formula, especially when you get to more complicated things like Nested IF Statements in Excel).

It would look like this:

In the example with the VLOOKUP we had the revenue in column B and the person’s name in column C (brought in with the VLOOKUP). We could put their quota in column D and then we’d put the following formula in cell E1:

=IF(C3>D3, “Met Quota”, “Did Not Meet Quota”)

This IF statement will tell us if the first salesperson met their quota or not. We would then copy and paste this formula along all the entries in the list. It would change for each sales person.

Having the result right there from the IF statement is a lot easier than manually figuring this out.

9. SUMIF, COUNTIF, AVERAGEIF

Formulas: =SUMIF(range, criteria, sum_range), =COUNTIF(range, criteria), =AVERAGEIF(range, criteria, average_range)

These formulas all do their respective functions (SUM, COUNT, AVERAGE) IF the criteria are met. There are also the formulas: SUMIFS, COUNTIFS, AVERAGEIFS where they will do their respective functions based on multiple criteria you give the formula.

I use these formulas in our example to see the average revenue (AVERAGEIF) if a person met their quota, Total revenue (SUMIF) for the just the sales people who met their quota, and the count of sales people who met their quota (COUNTIF)

10. CONCATENATE

A fancy word for combining data in 2 (or more) different cells into one cell. This can be done with the Concatenate excel formula or it can be done by simply putting the & symbol in between the two cells. If I have “Steve” in cell A1 and “Quatrani” in cell B1 I could put this formula: =A1&” “&B1 and it would give me “Steve Quatrani”. (The “ “ puts a space in between what you are combining with the &). I can use =concatenate(A1, “ “, B1) and it will give me the same thing: “Steve Quatrani”

Finding The Right Excel Formulas For The Job

There are 316 built in functions in Excel. You’re not going to sit there and memorize what all of them do (or at least I hope not!). Luckily Excel has a built in wizard that helps you find the correct formula for what you’re looking to do (if there is one).

Click the “fx” next to the formula bar in Excel

This brings up a menu and in there you can type in a description of what you are trying to do and it will bring up the correct excel formula:

I typed in “remove extra spaces” and it returned the TRIM formula that we went over earlier.

More Excel Formulas

There is so much more that I use on a regular basis such as Time formulas (NOW, TODAY, MONTH, YEAR, DAY, etc.), other formulas like AND and OR, along with many others.

The real power comes in combining these functions into complicated excel formulas.

Learn Excel Formulas Today!

Breaking Down Complicated Excel Formulas

=IFERROR(TRIM(IF(LEN(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE))>0,SUBSTITUTE(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE), ” “, “”),”")), “”)

Do you see formulas like the one above and run away screaming AHHHHHHHHHHHHHHHHHHHHHHHHH!!!

Well I don’t blame ya!

This can be a really intimidating formula even for the most seasoned Excel user.

I have a solution for you that makes it easy to both break down, and build up complicated combinations of Excel formulas but first check out this short video by fellow Udemy trainer, Mynda Treacy, that will reveal tips on how to get inside the mind of an Excel formula:

So What’s Going on With This Excel Formula?

Let’s break down all the Excel functions in it:

• IFERROR
• TRIM
• IF
• LEN
• VLOOKUP
• SUBSTITUTE

I’m not going to go in depth into each formula, but you’ll get the point.

Let’s start with the innermost formula. This is the end result that you are trying to accomplish.

We want to take a phrase (that we get with a VLOOKUP) that has a space in it and SUBSTITUTE that space with nothing. So it will take a phrase like “Excel Formula” and make it “ExcelFormula”.

SUBSTITUTE(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE), ” “, “”)

We use the VLOOKUP formula to get the actual phrase we want from a different sheet in the Excel Workbook if it matches what’s in cell F7.

VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE)

We use an IF statement to say IF the number of characters (LEN) of what’s returned from the VLOOKUP is above 0, then run the VLOOKUP, otherwise, put nothing here. This way if the VLOOKUP returns nothing, then nothing will happen and this will prevent most errors.

IF(LEN(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE))>0,SUBSTITUTE(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE), ” “, “”),”")

We then wrap it with the TRIM function which gets rid of all extra spaces, besides 1 space in between words. Sometimes when you’re getting data from a database extra spaces can be added after a word. This can make it really hard to compare data from different sources, so the TRIM function comes in handy a lot!

TRIM(IF(LEN(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE))>0,SUBSTITUTE(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE), ” “, “”),”")

Finally we wrap it in the IFERROR formula. This formula will be triggered if the other formulas wind up giving you an error. It could look something like #N/A and that’s pretty ugly. This can happen for legitimate reasons, but you don’t want to hand your boss a sheet full of #N/A symbols.

What happens is IF the combined formulas return any excel error, it will make the cell blank, otherwise it will show the results of the formula.

=IFERROR(TRIM(IF(LEN(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE))>0,SUBSTITUTE(VLOOKUP(F7, Sheet2!$A$1:$B$10000, 2, FALSE), ” “, “”),”")), “”)

There you have it, this long complicated formula broken down into simple step by step functions.

You can use the same method for building up a long formula

Our goal is to SUBSTITUTE the spaces for nothing so we start with that. We then have to pull it in from another sheet so we use VLOOKUP for that, etc., etc.

You always start with the innermost formula, the end result that you are looking for. Then you use other formulas to help you deal with the different situations you’ll have to deal with working with large datasets.

Commonly used VBA functions

Some of the commonly used VBA functions:

To autofill using VBA Macro : 

Range("A2: A50").FillDown

To autofill till the last row:

Range("A2").End(xlDown).Row
        Range("A2: " & Range("A2").End(xlDown).Row).Select
        Selection.FillDown

To use the auto filter in macro:

ActiveSheet.Range("$A$1:$BH$65535").AutoFilter Field:=1, Criteria1:= _
        "=selection1", Operator:=xlOr, Criteria2:="=Selection2"

To insert a blank column:

Columns("F:F").Select
    Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
For more information: